PVC//Wood Plastic Crust Foam Board Production Line

Products

PVC//Wood Plastic Crust Foam Board Production Line
  1. PVC Furniture Plate Production line
  2. PVC BathCabinet /Cabinet Plate Production Line
  3. PVC Floor Plate Production Line
  4. PVC Co-extrusion Production Line
  5. PVC Advertising Board Production Line
  6. PVC Building Template Production Line
Plastic Extruder Series
  1. Small Co-extruder
  2. Mono Screw Extruder
  3. Twin Conical Screws Extruder
Extrusion Lines For Plates, Flat Films And Sheets
  1. PET Packing Belt / Drawbench Production Line
  2. PC / PP / PE and PVC Plastic Hollow Cross Section Plate Extrusion Line
  3. PVC Free Foamed Sheet, Board, Decoration Sheet Production Line
  4. Wide Floor Sheet / Waterproof Sheet Production Line
  5. XPS Foamed Board Extrusion Line
  6. PE / PP Foamed Board Production Line
  7. PC / PP / PE Hollow Profile Board Production Line
  8. PVC Half-crust Foamed Board Production Line
  9. PVC Crusted Foamed Plate Production Line
  10. PVC Crust Foamed Plate Production Line
  11. PP / PE Board Production Line
  12. ABS Single Layer / Multi-Layers Composite Sheet Production Line
  13. PC / PMMA / PS / MS Sheet Production Line
  14. PP / PE / HIPS / PET / EVA / EVAOH Single Layer / Multi-Layers Composite Sheet Production Line
  15. Unidirectional and two-direction Plastic Earthwork Grid Production Line
  16. PVC artificial marble board/lamination sheet production line
  17. PVC Stone Plastic Floor Production Line
Extrusion Lines For Pipes
  1. Large Diameter HDPE Water Supply and Gas Supply Pipe Extrusion Line
  2. Large Diameter UPVC Solid Wall Tube Production Line
  3. Large Diameter (Steel Frame) Rotating Hollow Wave Tube
  4. Vertical and horizontal HDPE/PVC large-caliber double-wall corrugated pipe and PVC reinforced pipe production line
  5. Common Diameter HDPE Pipe Extrusion Line
  6. GF-63 Twin Pipe Extrusion Production Line
  7. PE Carbon Spiral Reinforcing Pipe Production line
  8. UHMW-PE Pipe or Plate Extrusion Line
  9. PVC / PE Cross-Section Communication Cable Pipe Extrusion Line
  10. PE-RT PP-R and PEX Dual-Strand Pipe Extrusion Line
  11. High Pressure RTP Twisted Composite Pipe Extrusion Line&Fittings
  12. Special use single-wall and double-wall corrugated pipe machine
  13. Small Diameter Special Pipe Extrusion Line
  14. PVC-C High Voltage Cable Protection Pipe Extrusion Line
  15. Aluminum-PPR Pipe Extrusion Line
  16. PVC Fiber Enhancing Soft Pipe Unit
  17. The U-PVC foamed inside spiral muffle pipe production line PVC-ABS composite water supply pipe production line
  18. HDPE Speed Hdpe Silicone Core Tube Extruder Production Line
  19. Pre-stress plastic corrugated pipe production line
  20. GFQ Series Automatic Pipe No-dust Cutter and Planetary Cutter
  21. ZSGK Series Automatic PVC Pipe Belling Machine and Mould.
Profiled Material Production Line
  1. PVC Edge Bang Productin Line
  2. PVC / PE / PP WOOD-PLASTIC PROFILED MATERIAL PRODUCTION LINE
  3. PVC Profiled Material Production Line
  4. WPC Wall Panel Production Line
Extrusion line for Granulation
  1. Plastic extruding granulation unit
  2. Extrusion line for granulation from recycled waste film
  3. The SLZ compulsion feed-in type conical screw recovery granulation unit
  4. Extrusion line for pigment palletizing
Auxiliary Equipments
  1. SMP-400 Powder grinder
  2. SWP Series Plastic Crusher
  3. SHRL High-speed Mixing and Cooling Machine
Extrusion series mould
  1. PP / PE pipe mould
Contact
  • East Of Pingcheng Road, Jiaoxi Industrial Park, Jiaozhou of Qingdao City, Shandong Province, China
  • 0532-82217766
  • 0532-82217766
  • zhongsu@madeplasticmachinery.com
Technical Parameters


PVC building template production line

1.The characteristics of the equipment:

The PVC wood plastic building template equipment produced by Qingdao Zhongsu Plastic Machinery Co. Ltd. is composed of double screw plastic extruder, automatic vacuum feeding machine, plate mould, vacuum shaping and cutting etc.. with a compact structure and superior performance. The optimum design of the screw and the screw barrel and the adoption of the special high performance alloy steel, make the whole machine have the advantages of uniform plasticizing, stable extrusion quantity, high output and long service life. The barrel of the extruder is heated by the cast aluminum heater and cooled by the wind flow to keep the temperature under control which is measured by the precision electric meter. The board can be well shaped through the precise calibration forming machine which can be adjusted flexibly. As for the automatic cutting part, the fixed length cutting device is adopted to guanrantee the precise length of the plate. The brands of the electrical component applied in the equipment are: SIEMENS, ABB, Schneider and other international brands (non counterfeit).

2.The characteristics and advantages of PVC wood plastic building template:

(1)The raw materials of PVC building template board are PVC and wasted recycling materials.It is a new type template to replace the steel templates and bamboo plywood with moistureproof, mouldproof, non absorbent, flame retardant performance.

(2)Non stick cement, easy to release after construction, no deformation.

(3)High construction efficiency, good quality. The construction of the building with a smooth surface, does not have to be modified furtherly.

(4)For the low cost and light weight, it can improve the construction efficiency, facilitate the storage and transportation and make the construction convenient.

(5)This processing method has many advantages, as the wasted templates can be crushed and then be reproduced. This can save the resources and is in line with the requirements of the "green industry".

(6)PVC crust foamed plate can insulate and absorb the sound. It has the heat insulation performance, and good shock proof effect.

(7)The final product can be processed through various processing,such as drilling, sawing, planing which can be nailed, glued like timber. The board can be welded and bonded with other PVC material. Therefore it can be flexibly processed at the construction site.

3.Difference between the PVC building templates and the common building templates:

(1)Environmental protection: Whether timber resources or steel resources, are non renewable resources. As a substitute of the steel, bamboo or wooden moulds, it can procvide ecological protection, green health and building decoration with no pollution.

(2)Recycling: The traditional building templates are damaged after used which become a solid waste and cause the environmental pollution. The wasted wood plastic building templates can be recycled and processed. They have been crushed again and put into the processing machinery for recycle usage to achieve the formation of new products.

(3)Durability: The common wooden template can be used for 3 to 4 times, while the wood plastic templates can be used for 25 to 28 times. The strength of the wood plastic building templates are 8-10 times of the common wooden templates’ strength, which are tested through dropping them from 3 to 4 meters vertical position to the ground with no damage and no deformation.

(4)Function: The wood plastic boards are waterproof, fireproof, alkali resistant with excellent anti-corrosion, sound insulation, stability and weatherability. They do not absorb water, the layers of which won’t separate and are easy demoulding.

(5)Practicability:The wood plastic board with the similar properties to the wood board, can be processed into any shape through various processing method such as sawing, nailing, polishing, sticking and chisel. The structure made the boards can be fixed by the nails and screws. It can simplize the maintenance for its light weight. It is easy processed than bamboo and wood. It can be made from various materials with different quality, also can be made from the mixture of recycled materials and raw material.

 


Online inquiry:
If you have any questions, feedback or comments, please fill out the form below and we will reply you as soon as possible.